Console Shifter Bezel - Removal

REMOVAL

Automatic





1. Pull up on shifter knob (3) and remove.
2. Using trim stick C-4755 or equivalent, separate the bezel (4) from the trim ring (5), if equipped.
3. Remove the screws (2) and using trim stick C-4755 or equivalent, separate the trim ring (5) from the shifter console (6).

Manual





1. Pull up on shifter knob (4) and remove.
2. Using trim stick C-4755 or equivalent, pry up on the shifter boot (5) and separate from the trim ring (3).
3. Remove the screws (3) and using trim stick C-4755 or equivalent, separate the trim ring (2) from the shifter console (6).