CVT Automatic Transaxle

U0001-CAN C BUS

For a complete wiring diagram Consult Diagrams/Electrical.

Theory of Operation

The Controller Area Network (CAN) is a high speed serial communication line for multiplex communication between multiple controllers that reside on the network. The Transmission Control Module monitors the transmit and receive message from the CAN BUS.

- When Monitored:
Ignition on in the run position with a system voltage between 9.0 and 16.0 volts.

- Set Condition:
If the Transmit or receive error counter is equal to or greater than 256.

For CAN Bus diagnostic procedures refer to No Response tests.