B123F

B123F-MENU SWITCH STUCK

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on.

- Set Condition:
The Instrument Cluster detects the Menu Switch active for greater than 20 seconds.





Diagnostic Test

1. CHECK FOR AN ACTIVE DTC
Turn the ignition on.
With the scan tool, record and erase DTCs.
Press the MENU switch three times.
With the scan tool, read DTCs.
Does the scan tool display: B123F-MENU SWITCH STUCK?

Yes

- Replace the Cluster.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete