LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 2WD L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft Gear/Sprocket >> Service and Repair >> Variable Valve Timing Assembly - Removal

Variable Valve Timing Assembly - Removal







REMOVAL

NOTE: Camshaft phaser and camshaft sprocket are supplied as an assembly, do not attempt to disassemble.





1. Remove camshaftsCamshaft - Removal.
2. Remove camshaft phaser (2) retaining bolt while holding the camshaft in place with a wrench (1) on the camshaft flats.
3. Remove phaser (2) assembly from camshaft.
scientia non olet · About LEMON Manuals