Glove Box Assembly

Fig 1: Disconnecting/Connecting Glove Box Damper Rod

Courtesy of CHRYSLER LLC

Separate the glove box damper rod (1) from the clove box by sliding the rod towards the rear of the vehicle to release it from the bin.

Fig 2: Removing/Installing Glove Box Assembly
Courtesy of CHRYSLER LLC
Open the glove box and carefully use fingers to press down glove box open stops at the top of the bin, downward to allow the glove box to rotate toward the carpet.
Rotate the box down and release the door hinges (2) at the bottom and remove the glove box.