LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster - Electrical Diagnostics >> Instrument Cluster - Electrical Diagnostics >> DTC Troubleshooting >> B1243-Rear Park Assist Disable Switch Stuck >> Diagnostic Test

Diagnostic Test

  1. CHECK FOR AN ACTIVE DTC 

    Turn the ignition on.

    With the scan tool, record and erase DTCs.

    Press the Rear Park Assist Disable switch three times.

    With the scan tool, read DTCs.

    Does the scan tool display: B1243-REAR PARK ASSIST DISABLE SWITCH STUCK? 

    Yes 

    1. Replace the Upper Switch Bank in accordance with the service information.
    2. Perform BODY VERIFICATION TEST .

    No 

    1. Test complete.