Seat Back Cushion / Cover - Front

Fig 1: Removing/Installing Front Seats

Courtesy of CHRYSLER LLC

Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
Remove the front seat. See REMOVAL .

Fig 2: Handles & Shields
Courtesy of CHRYSLER LLC
Remove the lumbar and recliner handles (1).
Remove the screws and remove the side shields (2).

Fig 3: Buckle
Courtesy of CHRYSLER LLC
Remove the belt buckle.

Fig 4: Back Bolts
Courtesy of CHRYSLER LLC
Remove the seat back bolts from both sides.

Fig 5: Removing/Installing Head Rest
Courtesy of CHRYSLER LLC
Remove the headrest.

Fig 6: Zip Strip
Courtesy of CHRYSLER LLC
Separate the j-straps (1 & 2) and pull cover up over frame.

Fig 7: Seat Back Hog Rings
Courtesy of CHRYSLER LLC
Cut off the hog rings (2) attaching the cover (3) to the cushion (1).

Fig 8: Headrest Sleeve Removal
Courtesy of CHRYSLER LLC
Squeeze the locking tab (3) and remove the headrest sleeves (1) and remove the cover.