Latch-Liftgate Glass: Removal

Fig 1: Remove/Install Liftgate Trim Panel

Courtesy of CHRYSLER LLC

Disconnect and isolate the battery negative cable.
Remove the trim panel from the liftgate (1). See REMOVAL .

Fig 2: Removing/Installing Liftgate Glass Latch
Courtesy of CHRYSLER LLC

NOTE: Grand Cherokee shown in illustration, Commander similar.
Using a grease pencil or equivalent, mark the position of the latch to aid installation.
Disconnect the electrical connectors (1) from the liftgate glass latch (3).
Remove the two nuts (2) that secure the latch (3) to the inside of the liftgate.
Remove the liftgate glass latch (3) from the vehicle.