LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (545RFE Automatic Transmission (Service Information)) >> Automatic Transmission - 545RFE - Service Information >> Pump-Oil >> Operation >> Oil Pump >> Converter Clutch Switch Valve

Converter Clutch Switch Valve

WARNING: This page is about a different variant/trim than selected.

The converter clutch switch valve is used to control the direction of oil flow to the torque converter. When the converter clutch is released (CC switch valve downshifted), hydraulic pressure is supplied to the front (OFF) side of the torque converter clutch. When the converter clutch is applied (CC switch valve upshifted), regulated oil pressure is supplied to the back (ON) side of the converter clutch.

scientia non olet · About LEMON Manuals