LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (545RFE Automatic Transmission (Service Information)) >> Automatic Transmission - 545RFE - Service Information >> GEARTRAIN-Planetary >> Disassembly >> Planetary GEARTRAIN

Planetary GEARTRAIN

WARNING: This page is about a different variant/trim than selected.
Fig 1: Planetary Geartrain Assembly
GC0051690Courtesy of CHRYSLER LLC
1. Snap Ring 4. Input Planetary Carrier
2. Thrust Bearing No. 10 5. input Sun Gear
3. Input Annulus 6. Reverse Carrier
  1. Remove the snap-ring (1) holding the input annulus (3) into the input carrier (4).
  2. Remove the input annulus (3) from the input carrier (4).
  3. Remove the reverse planetary gear carrier (6).
  4. Remove the number 10 thrust bearing (2) from the input sun gear (5).
  5. Remove the input sun gear (5) from the input carrier (4).
scientia non olet · About LEMON Manuals