Valve Body

WARNING: This page is about a different variant/trim than selected.

NOTE: The valve body can be removed for service without having to remove the transmission assembly. The valve body can be disassembled for cleaning and inspection of the individual components. See DISASSEMBLY .

Fig 1: Locating Primary Oil and Cooler Filters

Courtesy of CHRYSLER LLC

1 - PRIMARY OIL FILTER

2 - COOLER RETURN FILTER

3 - COOLER RETURN FILTER BYPASS VALVE

4 - VALVE BODY

Shift transmission into PARK.
Raise vehicle.
Disconnect wires at the solenoid and pressure switch assembly 23 pin electrical connector.
Position drain pan under transmission oil pan.
Remove transmission oil pan.
Remove the primary oil filter (1) from valve body.

Fig 2: Valve Body Bolts
Courtesy of CHRYSLER LLC

1 - VALVE BODY TO CASE BOLT (6)
Remove bolts (1) attaching valve body to transmission case.
Lower the valve body and work the electrical connector out of transmission case.
Separate the valve body from the transmission.