Manual Valve
WARNING: This page is about a different variant/trim than selected.
| 1 - TRS SELECTOR PLATE |
| 2 - DETENT SPRING |
| 3 - CLUTCH PASSAGE SEALS |
The manual valve is a relay valve. The purpose of the manual valve is to direct fluid to the correct circuit needed for a specific gear or driving range. The manual valve, as the name implies, is manually operated by the driver with a lever located on the top of the valve body. The valve is connected mechanically by a cable to the gearshift mechanism. The valve is held in each of its positions by a roller detent spring (2) that engages the roostercomb of the TRS selector plate (1). See Fig 1.