LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (5.7L Engine (Service Information)) >> Lubrication >> Pump-Engine Oil >> Removal >> Oil Pump

Oil Pump

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Oil Pump
GC0003966Courtesy of CHRYSLER LLC
  1. Remove the oil pan and pick-up tube. See REMOVAL .
  2. Remove the timing chain cover. See REMOVAL .
  3. Remove the four bolts, and the oil pump.