Cylinder Head Cover

WARNING: This page is about a different variant/trim than selected.

Fig 1: Ignition Coil Connectors, Ignition Coils & Torque Fasteners

Courtesy of CHRYSLER LLC

Disconnect battery negative cable.
Disconnect ignition coil connector (1).
Remove ignition coil retaining bolts (3).

Fig 2: Removing/Installing Ignition Coil
Courtesy of CHRYSLER LLC
Remove ignition coil (1).

Fig 3: Cylinder Head Cover Torque Sequence
Courtesy of CHRYSLER LLC

Remove cylinder head cover retaining bolts.

Fig 4: 5.7L/6.1L Cylinder Head Components

Courtesy of CHRYSLER LLC

1 - CYLINDER HEAD COVER

2 - GASKET

3 - FASTENERS

4 - CYLINDER HEAD

5 - HEAD GASKET

NOTE: The gasket (2) may be used again, provided no cuts, tears, or deformation has occurred.