LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (4.7L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Measuring Crankshaft End Play

Measuring Crankshaft End Play

WARNING: This page is about a different variant/trim than selected.
  1. Mount a dial indicator to front of engine with the locating probe on nose of crankshaft. See Fig 1.
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. See SPECIFICATIONS  for end play specification.
Fig 1: Checking Crankshaft End Play - Typical
GC0021207Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals