LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (NV140 Transfer Case (Service Information)) >> Transfer Case - NV140 - Service Information >> Seal-Front Output Shaft >> Removal >> Front Output Shaft Seal

Front Output Shaft Seal

WARNING: This page is about a different variant/trim than selected.

The front output shaft seal and wear sleeve cannot be serviced in the vehicle. The transfer case must be disassembled to remove the front output shaft assembly and seal.

scientia non olet · About LEMON Manuals