LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Seat-Third Row >> Removal

Seat-Third Row: Removal

Fig 1: Identifying Load Floor
GC0044975Courtesy of CHRYSLER LLC
  1. Remove the cargo load floor (1). See REMOVAL .
    Fig 2: Identifying Rear Seat Components
    GC0044987Courtesy of CHRYSLER LLC
  2. Remove the inner nut and bolt (2).
  3. Remove the outer nuts (3).
  4. Lift seat assembly up off of the studs (1) and release the front hooks from the strikers (4).
  5. Remove the seat.
    Fig 3: Seat Belt Lower Anchor And Trim
    GC0044473Courtesy of CHRYSLER LLC
  6. Remove the bolt (5) and remove the lower seat belt anchor (4).
scientia non olet · About LEMON Manuals