Instrument Panel: Bezel-Center: Removal: Bezel-Center

Fig 1: Identifying Trim Bezel

Courtesy of CHRYSLER LLC

1. Remove the 16 screws and using a trim stick C-4755 or equivalent, separate the trim bezel and remove.
   Fig 2: Removing/Installing Shifter Bezel Ring

   Courtesy of CHRYSLER LLC
2. Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.
   Fig 3: Removing/Installing Shifter Bezel

   Courtesy of CHRYSLER LLC
3. Using a trim stick C-4755 or equivalent, remove the shifter bezel.
   Fig 4: Identifying Center Bezel

   Courtesy of CHRYSLER LLC
4. Using a trim stick C-4755 or equivalent, remove the center bezel and disconnect the electrical connectors.