B1241

B1241-C/T SWITCH STUCK

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on.

- Set Condition:
The Instrument Cluster detects the C/T Switch active for greater than 20 seconds.





Diagnostic Test

1. CHECK FOR AN ACTIVE DTC
Turn the ignition on.
With the scan tool, record and erase DTCs.
Press the C/T switch three times.
With the scan tool, read DTCs.
Does the scan tool display: B1241-C/T SWITCH STUCK?

Yes

- Replace the C/T Switch.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.