B1285

B1285-PARK ASSIST DISABLE SWITCH PERFORMANCE

For a complete wiring diagram Consult Diagrams/Electrical.





Diagnostic Test

1. CHECK FOR AN ACTIVE DTC
Turn the ignition on.
With the scan tool, record and erase DTCs.
Press the Rear Park Assist Disable switch three times.
With the scan tool, read DTCs.
Does the scan tool display: B1285-PARK ASSIST DISABLE SWITCH PERFORMANCE?

Yes

- Replace the Upper Switch Bank.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.