LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Sunroof / Moonroof Switch >> Description and Operation >> Description

Description







DESCRIPTION





NOTE: The overhead console shown contains a combination power liftgate/power sunroof switch. Vehicles equipped with the power liftgate and no sunroof contain a single power liftgate switch only. Vehicles equipped with the power sunroof and no liftgate contain a single power sunroof switch only.

NOTE: On vehicles equipped with both a power sunroof and power liftgate the overhead console switches are serviced together as one assembly.

The power sunroof switch (1) is a combination push-button and rocker switch module mounted in the overhead console (3). The sunroof switch is a direct contact unit that is directly wired to the sunroof motor/module assembly. The sunroof switch performs the following functions:

- Power sunroof open (right side of switch pushed)
- Power sunroof closed (left side of switch pushed)
- Power sunroof vent (switch center button pushed)

The sunroof switch cannot be repaired and if damaged or inoperative must be replaced. Sunroof Switch - Removal for the sunroof switch removal procedure.