LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Seat Temperature Switch >> Service and Repair >> Heated Seat Switch - Removal

Heated Seat Switch - Removal







REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel, Instrument Panel Center Bezel - Removal.
3. Remove the lower instrument panel switch pod fasteners.
4. Remove the lower instrument panel switch pod from the vehicle.