LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner - Removal

Accessory Drive Belt Tensioner - Removal







3.7L





1. Remove accessory drive belt Accessory Drive Belt - Removal.
2. Remove accessory drive belt tensioner mounting bolt (1).
3. Remove accessory drive belt tensioner (2) from engine front cover.

WARNING: Because of high spring tension, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.
scientia non olet · About LEMON Manuals