LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler X, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Instrument Cluster >> Assembly >> Instrument Cluster >> Cluster Hood And Mask

Cluster Hood And Mask

Fig 1: Exploded View Of Instrument Cluster
GC0063947Courtesy of CHRYSLER LLC
  1. Position the cluster hood and mask unit (3) over the face of the cluster housing (2). Be certain that the odometer/trip odometer switch and reconfigurable display switch push buttons are inserted through the proper clearance holes in the mask.
  2. Working around the perimeter of the cluster, press the hood and mask over the face of the cluster housing until each of the eight integral latch features is fully engaged in the receptacles of the housing.
  3. Reinstall the cluster lens (5) onto the face of the cluster hood and mask unit. Refer toCLUSTER LENS .
  4. Reinstall the instrument cluster onto the instrument panel. See INSTALLATION .
  5. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals