LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Clutch Pedal Position Sensor / Switch >> Service and Repair >> Removal

Removal






REMOVAL




1. Disconnect wiring harness (1) from pedal position switch (2).




2. Pry pedal position switch (1) off clutch master cylinder.
scientia non olet · About LEMON Manuals