LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> 42RLE Automatic Transmission >> Removal

Removal






REMOVAL

NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.




1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission.
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid.




4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2).
scientia non olet · About LEMON Manuals