LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - Transfer Case >> Gear Sensor/Switch >> Service and Repair >> NV241OR Transfer Case >> Removal

Removal






REMOVAL
1. Raise and support the vehicle.
2. Disengage the transfer case position sensor connector from the position sensor.
3. Remove the position sensor from the transfer case.
scientia non olet · About LEMON Manuals