LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Installation

Installation






3.8L ENGINE




1. Install pulley and pulley bolt to tensioner. Tighten bolt to 61 Nm (45 ft. lbs.) torque.
2. install accessory drive belt.
scientia non olet · About LEMON Manuals