LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine & Automatic Transmission Cooling System) >> Transmission >> Cooler-Transmission >> Installation >> Transmission Oil Cooler-Installation

Transmission Oil Cooler-Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position transmission cooler in vehicle.
  2. Install transmission mounting bolts. Tighten to 14 N.m (123 in. lbs.)
  3. Install transmission cooler lines into transmission,
  4. Install locking plate and nut. Tighten nut to 22.5 N.m (200 in. lbs.)
  5. Install electric cooling fan. See INSTALLATION .
scientia non olet · About LEMON Manuals