Hoses-Cooling System-2.8L Diesel: Removal: Removal
WARNING: This page is about a different variant/trim than selected.
| 1 - HEATER CORE TO VISCOUS HEATER HOSE |
| 2 - MOUNTING STUD |
| 3 - HOSE CLAMP |
| 4 - HOSE CLAMP |
| 5 - HEATER CORE TO EGR COOLER HOSE |
- Drain cooling system. See STANDARD PROCEDURE .
- Remove engine cover from engine. Refer to REMOVAL .
- Disconnect heater core supply line at heater core and viscous heater. Remove hose from vehicle.
- Disconnect heater core return line (5) from heater core and EGR cooler. Remove hose from vehicle.