LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine & Automatic Transmission Cooling System) >> Accessory Drive >> Pulley-Idler >> Removal >> Idler Pulley-Removal-3.8L

Idler Pulley-Removal-3.8L

WARNING: This page is about a different variant/trim than selected.
Fig 1: Idler Pulley - 3.8L
GC0063852Courtesy of CHRYSLER LLC
1 - IDLER PULLEY
2 - IDLER PULLEY BOLT
  1. Remove accessory drive belt. See REMOVAL .
  2. Remove bolt (1) and idler pulley (2).
scientia non olet · About LEMON Manuals