LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Manifolds >> Manifold-Exhaust-Left >> Removal >> Exhaust Manifold - Left

Exhaust Manifold - Left

Fig 1: Inlet Air Temperature Sensor 3.8L
GC0064449Courtesy of CHRYSLER LLC
  1. Disconnect battery negative cable.
  2. Remove the fresh air hose (1).
  3. Disconnect left cylinder bank spark plug wires.
    Fig 2: O2 Sensors Left Side
    GC0064450Courtesy of CHRYSLER LLC
  4. Remove heat shield attaching bolts.
  5. Remove bolts attaching exhaust to manifold.
  6. Disconnect the left side oxygen sensors (1,2).
  7. Remove bolts attaching exhaust manifold to cylinder head.
  8. Remove the exhaust manifold.
scientia non olet · About LEMON Manuals