LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Cylinder Head >> Cover-Cylinder Head- Right >> Removal >> Cylinder Head Cover - Right

Cylinder Head Cover - Right

Fig 1: Cylinder Head Cover Gasket
GC0064338Courtesy of CHRYSLER LLC
1 - CYLINDER HEAD COVER
2 - BOLT
3 - SEAL (SERVICED WITH BOLT)
4 - GASKET
  1. Disconnect negative cable from battery.
  2. Disconnect spark plug wires from plugs.
  3. Disconnect CCV hose from cylinder head cover.
  4. Remove cylinder head cover bolts.
  5. Remove cylinder head cover (1) and gasket (4).
scientia non olet · About LEMON Manuals