Rear Axle - 226RBI: Differential: Disassembly: Differential

Fig 1: Identifying Ring Gear & Bolt

Courtesy of CHRYSLER LLC

1. Remove ring gear bolts (1) and ring gear (2) from differential.
   Fig 2: Removing/Installing Pinion Mate Shaft Using Punch & Hammer

   Courtesy of CHRYSLER LLC
2. Remove pinion mate shaft (1) roll pin with a punch (2) and hammer.
   Fig 3: Identifying Pinion Mate Shaft & Pinion Gears

   Courtesy of CHRYSLER LLC
3. Remove pinion mate shaft (1) from differential and pinion gears (2).
   Fig 4: Identifying Pinion Gears, Thrust Washers & Differential Windows

   Courtesy of CHRYSLER LLC
4. Rotate pinion gears (1) with thrust washers (2) to differential windows (3).
5. Remove pinion gears (1) with thrust washers (2) through differential windows (3).
   Fig 5: Identifying First Side Gear & Thrust Washer

   Courtesy of CHRYSLER LLC
6. Remove first side gear (1) with thrust washer (2) through differential window.
   Fig 6: Identifying Second Side Gear & Thrust Washer

   Courtesy of CHRYSLER LLC
7. Remove second side gear (1) with thrust washer (2) through differential window.