LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Differential & Driveline (Service Information) >> Front Axle - 216FBI >> Cover-Differential >> Installation >> Differential Cover

Differential Cover

Fig 1: Housing Cover - Typical
GC0030093Courtesy of CHRYSLER LLC
  1. Apply a 6.35 mm (1/4 in.) bead of Mopar Silicone Rubber Sealant (3) or equivalent to the housing cover.
    CAUTION: If housing cover is not installed within 3 to 5 minutes, the cover must be cleaned and new RTV applied. Failure to heed caution may result in damage.
  2. Install differential cover (2), and tighten cover bolts in a crisscross pattern to 41 N.m (30 ft. lbs.).
  3. Fill differential to specifications.
  4. Install fill plug and tighten to 34 N.m (25 ft. lbs.).
scientia non olet · About LEMON Manuals