LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differential & Driveline (Service Information) >> Rear Axle - 198RBI >> Shaft-Axle >> Installation >> Axle Shaft

Axle Shaft

Fig 1: Axle Assembly
GC0063693Courtesy of CHRYSLER LLC
  1. Install axle assembly (1) into the axle tube (2).
    Fig 2: Rear Wheel Speed Sensor
    GC0063649Courtesy of CHRYSLER LLC
    WARNING: Never reuse axle retainer nuts. Used torque nuts can loosen up. Failure to follow these instruction may result in personal injury.
  2. Install new  axle retainer nuts and tighten to 61 N.m (45 ft. lbs.).
  3. Install brake (2) and harness (1).
    Fig 3: Cable At Support Plate
    GC0063647Courtesy of CHRYSLER LLC
  4. Install park brake cables (1).