Axle Bearing And Seal

Fig 1: Axle Retainer

Courtesy of CHRYSLER LLC

NOTE: Inspect axle shaft retaining plate (1), if plate is bent or warped replace plate.

Install retaining plate (1) on axle shaft (2).

Fig 2: Axle Shaft Seal
Courtesy of CHRYSLER LLC
Apply a coat of multi-purpose grease on sealing surface of axle seal.
Install seal (1) on axle shaft (2) with cavity away from axle shaft retaining.

Fig 3: Bearing Retainer
Courtesy of CHRYSLER LLC
Press bearing and bearing retaining ring (1) onto axle shaft (2) with press and press blocks.

Fig 4: Dust Shield & Backing Plate
Courtesy of CHRYSLER LLC
Install dust shield (1) and support plate (2) on axle shaft retainer.
Lubricate bearing with Mopar Wheel Bearing Grease, or equivalent. Wipe excess grease from outside of bearing.
Install axle in vehicle.