LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differential & Driveline (Service Information) >> Front Axle - 216FBI >> Shaft-Axle >> Removal >> Axle Shaft

Axle Shaft

Fig 1: Stub Shaft Nut
GC0063539Courtesy of CHRYSLER LLC
  1. With transmission in neutral, position vehicle on hoist.
  2. Remove brake components.
  3. Remove wheel speed sensor from hub bearing.
  4. Remove hub nut (1) from axle shaft (2).
    Fig 2: Hub Bearing Bolts
    GC0063540Courtesy of CHRYSLER LLC
  5. Remove three hub bearing bolts (1) from steering knuckle (2).
    Fig 3: Axle Shaft
    GC0063541Courtesy of CHRYSLER LLC
  6. Remove hub bearing (1) with axle shaft (2) through steering knuckle (3).
  7. Remove brake shield and hub bearing from axle.
scientia non olet · About LEMON Manuals