LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differential & Driveline (Service Information) >> Front Axle - 186FBI >> Seals-Axle Shaft >> Installation >> Axle Shaft Seal

Axle Shaft Seal

Fig 1: Axle Seal Installation
GC0063543Courtesy of CHRYSLER LLC
  1. Clean axle oil seal bores.
  2. Install oil seals in axle tube, then with Turnbuckle 6797 (1) and Discs 8110 (2) tighten tool until disc bottoms (2) in housing.
    Fig 2: Differential Case
    GC0063542Courtesy of CHRYSLER LLC
  3. Install differential (1) into housing (1) with bearing cups (3) and shims. Install bearing caps.
    Fig 3: Axle Shaft
    GC0063541Courtesy of CHRYSLER LLC
  4. Install hub bearings (1) with axle shafts (2).
  5. Install wheel speed sensor.
  6. Install brake components.
scientia non olet · About LEMON Manuals