LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Base - Service Information >> Hydraulic/Mechanical >> Brake Pads/Shoes >> Removal >> Disc Brake Pads - Rear

Disc Brake Pads - Rear

Fig 1: Rear Disc Brake Caliper Adapter
GC0063820Courtesy of CHRYSLER LLC
  1. Raise and support vehicle.
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper.
  4. Remove the caliper. See REMOVAL .
    NOTE: Do not allow brake hose to support caliper assembly.
  5. Support and hang the caliper.
  6. Remove the inboard brake pad (3) from the caliper adapter (1).
  7. Remove the outboard brake pad (4) from the caliper adapter (1).