LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Base - Service Information >> Hydraulic/Mechanical >> Brake Pads/Shoes >> Removal >> Disc Brake Pads - Front

Disc Brake Pads - Front

  1. Raise and support vehicle.
  2. Remove wheel and tire assembly.
  3. Drain small amount of fluid from master cylinder brake reservoir with clean  suction gun.
    Fig 1: Disc Brake Caliper
    GC0063441Courtesy of CHRYSLER LLC
  4. Remove the 2 caliper mounting bolts (3).
  5. Compress the caliper (4) and remove from the adaptor.
  6. Secure caliper (4) to nearby suspension part with wire. Do not allow brake hose to support caliper weight. 
    Fig 2: Brake Pads
    GC0063821Courtesy of CHRYSLER LLC
  7. Remove the inboard (2) and outboard brake pads (3) from the caliper adapter (4).
  8. Remove the anti-rattle clips from the brake caliper adapter (4).
scientia non olet · About LEMON Manuals