Park Brake System Lockout

Fig 1: Floor Console 3

Courtesy of CHRYSLER LLC

1. Remove the center floor console (3). Refer to REMOVAL .
   Fig 2: Park Lever Lock Out

   Courtesy of CHRYSLER LLC
2. Pull up on the equalizer cable (3) and then install a suitable tool (1) to lockout the park brake lever.
   Fig 3: Cable Front Mount

   Courtesy of CHRYSLER LLC
3. Remove the rear park brake cables (2) from the equalizer.

When repairs are completed install the rear park brake cables to the equalizer, remove the lockout tool, check the operation of the system and then install the center floor console. Refer to INSTALLATION .