LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Mechanical Brake System - Base (Service Information) >> Base - Service Information >> Hydraulic/Mechanical >> Disc Brake Caliper Adapter >> Removal >> Disc Brake Caliper Adapter - Rear

Disc Brake Caliper Adapter - Rear

Fig 1: Rear Disc Brake Caliper
GC0063822Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle.
  2. Remove the wheel and tire assembly.
  3. Remove the caliper (1). See REMOVAL .
  4. Remove the disc brake caliper from the adapter.
    CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
    Fig 2: Rear Disc Brake Caliper Adapter
    GC0063820Courtesy of CHRYSLER LLC
  5. Remove the inboard (3) and outboard brake pads (4). See REMOVAL .
  6. Remove the caliper adapter mounting bolts (2).
scientia non olet · About LEMON Manuals