LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Mechanical Brake System - Base (Service Information) >> Base - Service Information >> Hydraulic/Mechanical >> Disc Brake Caliper Adapter >> Removal >> Disc Brake Caliper Adapter - Front

Disc Brake Caliper Adapter - Front

  1. Raise and support the vehicle.
  2. Remove the front wheel and tire assembly.
    Fig 1: Disc Brake Caliper
    GC0063441Courtesy of CHRYSLER LLC
  3. Remove the caliper (4) from the adaptor (3). See REMOVAL .
  4. Remove the disc brake caliper (1) from the adapter (4).
    CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
    Fig 2: Brake Pads
    GC0063821Courtesy of CHRYSLER LLC
  5. Remove the inboard (2) and outboard brake pads (3). See REMOVAL .
  6. Remove the caliper adapter mounting bolts (1).
  7. Remove the caliper adapter (4).
scientia non olet · About LEMON Manuals