LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System - Electrical Diagnostics >> Brakes - Abs Electrical Diagnostics >> DTC Troubleshooting >> C123A-Esp System Sensors Calibration >> Diagnostic Test

Diagnostic Test

  1. 1) INITIALIZE ANTI-LOCK BRAKES MODULE 

    Initialize ECU. Refer to ABS VERIFICATION TEST .

    Does this DTC reset? 

    Yes 

    1. Replace the Anti-Lock Brake Module in accordance with the Service Information.
    2. Perform ABS VERIFICATION TEST .

    No 

    1. Test complete.