LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine & Automatic Transmission Cooling System >> Transmission >> Cooler-Transmission >> Installation >> Transmission Oil Cooler-Installation

Transmission Oil Cooler-Installation

  1. Position transmission cooler in vehicle.
  2. Install transmission mounting bolts. Tighten to 14 N.m (123 in. lbs.)
  3. Install transmission cooler lines into transmission. See STANDARD PROCEDURE .
  4. Install locking plate and nut. Tighten nut to 22.5 N.m (200 in. lbs.)
  5. Install electric cooling fan. See INSTALLATION .
scientia non olet · About LEMON Manuals