LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine & Automatic Transmission Cooling System >> Accessory Drive >> Pulley-Idler >> Removal >> Idler Pulley-Removal-3.7L

Idler Pulley-Removal-3.7L

Fig 1: Automatic Belt Tensioner
GC0008301Courtesy of CHRYSLER LLC
1 - AUTOMATIC TENSIONER ASSEMBLY
  1. Remove accessory drive belt. See REMOVAL .
  2. Remove cover.
  3. Remove bolt and pulley.
scientia non olet · About LEMON Manuals