LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine & Automatic Transmission Cooling System >> Accessory Drive >> Pulley-Idler >> Installation >> Idler Pulley-Installation-3.7L

Idler Pulley-Installation-3.7L

Fig 1: Automatic Belt Tensioner
GC0008301Courtesy of CHRYSLER LLC
1 - AUTOMATIC TENSIONER ASSEMBLY
  1. Install pulley and pulley bolt to tensioner. Tighten bolt to 61 N.m (45 ft. lbs.) torque.
  2. install accessory drive belt. See INSTALLATION .
scientia non olet · About LEMON Manuals