LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Cluster - Electrical Diagnostics >> Instrument Cluster >> DTC Troubleshooting >> Mil Lamp Open >> Diagnostic Test

Diagnostic Test

  1. 1) INSTRUMENT CLUSTER 

    With the scan tool, erase DTCs.

    Turn the ignition off, wait 10 seconds, then turn the ignition on.

    With the scan tool, read DTCs.

    When this code is set, the Instrument Cluster must be replaced. 

    Yes 

    1. Replace the Instrument Cluster in accordance with the Service Information.
    2. Perform BODY VERIFICATION TEST .

    No 

    1. Test Complete.
scientia non olet · About LEMON Manuals