LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Cluster - Electrical Diagnostics >> Instrument Cluster >> DTC Troubleshooting >> *Seat Belt Indicator Always On >> Diagnostic Test

Diagnostic Test

  1. 1) ACM DTC PRESENT 

    Turn the ignition on.

    Ensure that the seat belt buckles are not damaged and are buckled.

    With the scan tool select MIC, in Inputs/Outputs, read the Seatbelt Lamp state.

    Does the scan tool display: ON? 

    Yes 

    1. Refer to Seat Belt symptom(s) in RESTRAINTS - ELECTRICAL DIAGNOSTICS .

    No 

    1. Replace and configure the Instrument Cluster in accordance with the Service Information.
    2. Perform BODY VERIFICATION TEST .
scientia non olet · About LEMON Manuals